Contact Us
Lisa
Marketing department Center
Phone: +86 136 0242 8392
ADD: No.70 Xinhe Avenue, Shajing Street, Baoan District, Shenzhen, Guangdong, China
FAQ
BING MOLD Standard Surface Finish Chart
BING MOLD Standard Surface Finish Chart
You can specify the surface finish on your custom plastic injection molding parts. Many surface finish options are available to choose from. See the table below for our standard surface finish options.
| Surface Finish | Guide | Typical Applications |
|---|---|---|
| Standard No Machine Mark | Tool Marks Removed | Low Cosmetic |
| SPI-C1 | 600 Stone | Low Polish Parts |
| SPI-B1 | 600 Grit Paper | Medium Polish Parts |
| SPI-A2 | Grade #6 Diamond | High Polish Parts |
| SPI-A1 | Grade #3 | Lens or Mirror |
| IM-1 Light Bead Blast | Need 1 Degree Draft Angle | |
| IM-2 Medium Bead Blast | Need 1.5 Degree Draft Angle | |
| IM-3 Heavy Bead Blast | Need 3 Degree Draft Angle |
